Nokia 1208 pinout

From CPKB - Cell Phone Knowledge Base
Revision as of 23:21, 15 December 2014 by Is0-mick (Talk | contribs)

Jump to: navigation, search
Nokia 1208 (FBus cable) pinout

This is the FBUS cable pinout of Nokia 1208 mobile phone.

  • Use 3.3 kOhm resistor
  • JIG number: 4
  • UFC v1 cable number: ?
  • UFC v2 cable number: 4

The pinout in the diagram is incorrect. Please note that the RX and dau/clk pins are the wrong way round in the diagram.

The top pin is dau/clk (nearest battery connector) then FBUS TX then FBUS RX at the bottom.


Also known as

  • Nokia RH-105 mobile phone / mobilephone pinout / pin-out
  • Nokia RH105 cell phone / cellphone connector

Compatibility

Nokia 1208 FBus cable is compatible with:

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

Related pinouts

See also

Retrieved from "http://www.cpkb.org/w/index.php?title=Nokia_1208_pinout&oldid=14571"