Nokia 2720 fold pinout

From CPKB - Cell Phone Knowledge Base
Revision as of 21:59, 27 September 2012 by Jr dish (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Nokia 2720 fold FBus cable pinout

Nokia 2720 fold mobile phone FBus data cable pinout.

  • Use 5.1 or 7.5 kOhm resistor
  • JIG number: 7
  • UFC v1 cable number: 6
  • UFC v2 cable number: 7
  • XFBUS-II: DCT4-G/DCT4-I


Also known as[edit]

  • Nokia RM-519 cell phone / cellphone f-bus pinout / pin-out
  • Nokia RM519 mobile phone / mobilephone connector
  • Nokia 2720f pin out
  • Nokia 2720s pinout
  • Nokia 2720a-2 pinout

Notes[edit]

  • Disconnect VPP pin in case of communication error.

Compatibility[edit]

Nokia 2720 fold FBus cable is compatible with:

Abbreviations[edit]

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

Related pinouts[edit]

See also[edit]