Nokia C2-01 pinout

Nokia C2-01 FBus cable pinout

• Use 7.5 kOhm resistor
• JIG number: ?
• UFC v1 cable number: ?
• UFC v2 cable number: 7 and 11
• X-FBUS 2: BB5-M

Also known as

• Nokia C2 01 RM-721 RM-722 cell phone / cellphone pinout / pin-out
• Nokia C2-01 RM721 RM722 mobile phone / mobilephone connector

Notes

• Disconnect VPP pin in case of communication error.
• the two MBUS pins must be connected

Compatibility

Nokia C2-01 FBus cable is compatible with:

Abbreviations

F/MBus cable connector pinout: GND - Ground TX - Data send RX - Data receive RX2 - ? MBUS - MBUS data exchange protocol FBUS - FBUS data exchange protocol VPP - Programming power supply VCC - Common collector voltage VBUS - VBUS, USB powerdetect

Battery connector pinout: GND - Ground (Attention, this is not system GND) VBAT+ or VCC - Battery positive BSI - Battery Size Indicator BTemp - Battery Temperature (optional)

Related pinouts

• Nokia charger pinout
• Nokia 3.5 mm AV connector pinout, Nokia jack headset pinout
• Micro-USB pinout
• Nokia BL-5C battery pinout

See also

• Other Nokia phone pinouts
• Nokia battery pinouts
• Nokia C2-01 specification
• Nokia C2-01 RM-721 firmware data package download
• Nokia C2-01 RM-722 firmware data package download
• Nokia C2-01 service manual and schematic download