Nokia E52 pinout

From CPKB - Cell Phone Knowledge Base
Revision as of 15:22, 10 November 2011 by 31.175.106.82 (Talk)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Nokia E52 (FBus cable) pinout

This is the FBUS cable pinout of Nokia E52 mobile phone.

  • Use 7.5 or 10 kOhm resistor
  • JIG number: 8
  • UFC v1 cable number: 9
  • UFC v2 cable number: 9


Also known as[edit]

  • Nokia RM-469 cell phone / cellphone pinout / pin-out
  • Nokia RM469 mobile phone / mobilephone connector
  • Nokia E52-1 pinout

Compatibility[edit]

Nokia E52 FBus cable is compatible with:

Notes[edit]

  • Disconnect VPP if connection doesn't work
  • The two MBus pin must be connected

Abbreviations[edit]

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

Related pinouts[edit]

See also[edit]