Nokia 2680 Slide pinout

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
Nokia 2680 Slide pinout

Nokia 2680 Slide mobile phone FBus data cable pinout.

  • Use 7.5 kOhm resistor.
  • JIG number: ?
  • UFC v1 cable number: ?
  • UFC v2 cable number: 6
  • XFBUS-II: DCT4-G/DCT4-I


Also known as[edit]

  • Nokia 2680s pinout / pin-out / connector
  • Nokia 2680s-2 pinout / pin-out / connector
  • Nokia RM-392 pinout / pin-out / connector
  • Nokia RM392 pinout / pin-out / connector

Notes[edit]

  • Disconnect VPP pin in case of communication error.

Compatibility[edit]

Nokia 2680 Slide mobile phone FBus data cable is compatible with:

Abbreviations[edit]

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

Related pinouts[edit]

See also[edit]

Retrieved from "http://www.cpkb.org/w/index.php?title=Nokia_2680_Slide_pinout&oldid=12817"