Difference between revisions of "Nokia 1680 classic pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
Line 1: Line 1:
[[Image:1680pinout.jpg|thumb]]
+
[[Image:1680pinout.jpg|thumb|Nokia 1680 classic FBus cable pinout]]
This is the F-Bus pinout ( pin-out ) of Nokia 1680 classic. Use 5,1 kOhm resistor between BSI and GND. Didn't tested, so if somebody tests it, please edit this article. Thanks. :)
+
This is the F-Bus cable pinout of Nokia 1680 classic mobile phone.  
  
== Also known as ==
+
* Use 5,1 kOhm resistor
* Nokia 1680c pinout / pin-out / connector
+
* JIG number: 4
* Nokia 1680c-2 pinout / pin-out / connector
+
* UFC cable number: 2
* Nokia RM-394 pinout / pin-out / connector
+
* Nokia RM394 pinout / pin-out / connector
+
  
{{Template:Pinout_abbreviations}}
+
 
 +
== Also known as ==
 +
* Nokia 1680c pinout
 +
* Nokia 1680c-2 pin-out
 +
* Nokia RM-394 connector
 +
* Nokia RM394 pinout
  
 
== Compatibility ==
 
== Compatibility ==
 +
'''Nokia 1680 classic FBus cable is compatible with:'''
 +
* [[Nokia 1681 classic]]
 +
* [[Nokia 1682 classic]]
 +
 +
{{Template:Pinout_abbreviations}}
  
 
== See also ==
 
== See also ==
 
* [[Nokia 1680 classic|Nokia 1680 classic specification]]
 
* [[Nokia 1680 classic|Nokia 1680 classic specification]]
 +
* [[Nokia BL-5CA battery pinout]]
 +
* [[:Category:Nokia pinout|Other Nokia phone pinouts]]
  
 
[[Category:Nokia_pinout]]
 
[[Category:Nokia_pinout]]

Revision as of 21:53, 16 June 2010

Nokia 1680 classic FBus cable pinout

This is the F-Bus cable pinout of Nokia 1680 classic mobile phone.

  • Use 5,1 kOhm resistor
  • JIG number: 4
  • UFC cable number: 2


Also known as

  • Nokia 1680c pinout
  • Nokia 1680c-2 pin-out
  • Nokia RM-394 connector
  • Nokia RM394 pinout

Compatibility

Nokia 1680 classic FBus cable is compatible with:

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

See also