Difference between revisions of "Nokia 2600 classic pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
Line 3: Line 3:
  
 
Use 5,1 kOhm resistor between BSI and GND.
 
Use 5,1 kOhm resistor between BSI and GND.
 +
 +
== Also known as ==
 +
* Nokia 2600c pinout
 +
* Nokia RM-340 pinout
 +
* Nokia RM340 pinout
 +
 
{{Template:Pinout_abbreviations}}
 
{{Template:Pinout_abbreviations}}
  

Revision as of 15:05, 6 April 2010

Nokia 2600 classic pinout

This is the F-Bus pinout ( pin-out ) of Nokia 2600 classic.

Use 5,1 kOhm resistor between BSI and GND.

Also known as

  • Nokia 2600c pinout
  • Nokia RM-340 pinout
  • Nokia RM340 pinout

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

Compatibility

Nokia 2600 classic FBus cable compatible with: