Difference between revisions of "Nokia 6120 classic pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
(Created page with 'F-Bus pinout ( pin-out, connector ) of Nokia 6120 classic. ( Nokia 6120c ) thumb Use 5.1 kOhm resistor between BSI and GND. {{Template:Pinou…')
 
Line 6: Line 6:
  
 
== See also ==
 
== See also ==
* [[Nokia_6120_classic]]
+
* [[Nokia 6120 classic]]
* [[Nokia_BL-5B_battery]]
+
* [[Nokia BL-5B battery]]
  
 
[[Category:Nokia_pinout]]
 
[[Category:Nokia_pinout]]

Revision as of 21:24, 16 February 2010

F-Bus pinout ( pin-out, connector ) of Nokia 6120 classic. ( Nokia 6120c )

Nokia6120classicpinout.jpg

Use 5.1 kOhm resistor between BSI and GND.

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

See also