Nokia 6600i slide pinout

From CPKB - Cell Phone Knowledge Base
Revision as of 20:02, 30 June 2010 by Mobiledoc (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search 
Go to Nokia 6600 slide pinout wiki page for the mobile phone FBus cable pinout.
  • Use 5.1 kOhm resistor
  • JIG number: 2
  • UFC v1 cable number: ?
  • UFC v2 cable number: 2


Also known as

  • Nokia RM-570 cell phone / cellphone pinout / pin-out
  • Nokia RM570 mobile phone / mobilephone connector
  • Nokia 6600is / 6600islide pinout

Compatibility

Nokia 6600i slide FBus cable is compatible with:

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

See also

Retrieved from "http://www.cpkb.org/w/index.php?title=Nokia_6600i_slide_pinout&oldid=2157"