Difference between revisions of "Nokia E51 pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
Line 4: Line 4:
 
Use 7,5 kOhm resistor between BSI and GND.
 
Use 7,5 kOhm resistor between BSI and GND.
 
{{Template:Pinout_abbreviations}}
 
{{Template:Pinout_abbreviations}}
 +
 +
[[Category:Nokia_pinout]]

Revision as of 16:54, 14 February 2010

E51pinout.jpg

This is the F-Bus pinout ( pin-out ) of Nokia E51.

Use 7,5 kOhm resistor between BSI and GND.

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)