Difference between revisions of "Nokia E66 pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
(Created page with 'Nokia E66 (FBus cable) pinout This is the FBUS cable pinout of Nokia E66. * Use 7.5 kOhm resistor between BSI and GND. == Also known as =…')
 
m
Line 1: Line 1:
 
[[Image:Nokia_E66_pinout.jpg|thumb|Nokia E66 (FBus cable) pinout]]
 
[[Image:Nokia_E66_pinout.jpg|thumb|Nokia E66 (FBus cable) pinout]]
This is the FBUS cable pinout of Nokia E66.  
+
This is the FBUS cable pinout of [[Nokia E66]].  
  
* Use 7.5 kOhm resistor between BSI and GND.
+
* Use 7.5 kOhm resistor
 +
* JIG number: 5
 +
* UFC v1 cable number: 3
 +
* UFC v2 cable number: 7 or 5
  
  
Line 19: Line 22:
 
* [[Nokia E66|Nokia E66 specification]]
 
* [[Nokia E66|Nokia E66 specification]]
 
* [[Nokia BL-4U battery pinout]]
 
* [[Nokia BL-4U battery pinout]]
 +
* [[:Category:Nokia pinout|Other Nokia phone pinouts]]
  
 
[[Category:Nokia_pinout]]
 
[[Category:Nokia_pinout]]

Revision as of 10:13, 3 July 2010

Nokia E66 (FBus cable) pinout

This is the FBUS cable pinout of Nokia E66.

  • Use 7.5 kOhm resistor
  • JIG number: 5
  • UFC v1 cable number: 3
  • UFC v2 cable number: 7 or 5


Also known as

  • Nokia E66-1 pinout
  • Nokia RM-343 pin-out
  • Nokia RM343 connector

Compatibility

Nokia E66 FBus cable is compatible with:

  •  ?

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

See also