Difference between revisions of "Nokia N70 pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
m
m
 
Line 4: Line 4:
 
* Use 5,1 kOhm resistor
 
* Use 5,1 kOhm resistor
 
* JIG number: 5
 
* JIG number: 5
 +
* UFCv1 cable number: 3
 +
* UFCv2 cable number: 3 or 5
  
  
Line 22: Line 24:
 
* [[Nokia BL-5C battery pinout]]
 
* [[Nokia BL-5C battery pinout]]
 
* [[:Category:Nokia pinout|Other Nokia phone pinouts]]
 
* [[:Category:Nokia pinout|Other Nokia phone pinouts]]
 +
* [[Nokia N70 RM-84 firmware data package download]]
 +
* [[Nokia N70 RM-99 firmware data package download]]
 +
* [[Nokia N70 service manual and schematic download]]
  
 
[[Category:Nokia_pinout]]
 
[[Category:Nokia_pinout]]

Latest revision as of 18:51, 5 December 2010

Nokia N70 pinout

This is the F-Bus pinout ( pin-out ) of Nokia N70 mobile phone.

  • Use 5,1 kOhm resistor
  • JIG number: 5
  • UFCv1 cable number: 3
  • UFCv2 cable number: 3 or 5


Also known as[edit]

  • Nokia N70-1 / N70-5 pinout / pin-out / connector
  • Nokia RM-84 / RM-99 pinout / pin-out / connector
  • Nokia RM84 / RM99 pinout / pin-out / connector

Compatibility[edit]

Nokia N70 FBus cable pinout is compatible with:

Abbreviations[edit]

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

See also[edit]