Difference between revisions of "Nokia N72 pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
(Created page with ' Go to Nokia N70 pinout wiki page for the mobile phone pinout. * Use 5,1 kOhm resistor * JIG number: 5 == Also known as == * Nokia N72-5 pinout / pin-out / connector * Nok…')
 
m
Line 1: Line 1:
Go to [[Nokia N70 pinout]] wiki page for the mobile phone pinout.
+
[[Image:Nokia_n72_pinout.jpg|thumb|Nokia N72 (FBus cable) pinout]]
 +
This is the FBUS cable pinout of [[Nokia N72]] mobile phone.  
  
 
* Use 5,1 kOhm resistor
 
* Use 5,1 kOhm resistor
 
* JIG number: 5
 
* JIG number: 5
 +
* UFC v1 cable number: ?
 +
* UFC v2 cable number: 5 or 7
  
  

Revision as of 18:27, 2 July 2010

Nokia N72 (FBus cable) pinout

This is the FBUS cable pinout of Nokia N72 mobile phone.

  • Use 5,1 kOhm resistor
  • JIG number: 5
  • UFC v1 cable number: ?
  • UFC v2 cable number: 5 or 7


Also known as

  • Nokia N72-5 pinout / pin-out / connector
  • Nokia RM-180 pinout / pin-out / connector
  • Nokia RM180 pinout / pin-out / connector

Compatibility

Nokia N72 FBus cable pinout is compatible with:

Abbreviations

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

See also