Difference between revisions of "Nokia N72 pinout"

From CPKB - Cell Phone Knowledge Base
Jump to: navigation, search
 
Line 4: Line 4:
 
* Use 5.1 kOhm resistor
 
* Use 5.1 kOhm resistor
 
* JIG number: 5
 
* JIG number: 5
* UFC v1 cable number: ?
+
* UFC v1 cable number: 3
 
* UFC v2 cable number: 5 or 7
 
* UFC v2 cable number: 5 or 7
  

Latest revision as of 16:37, 12 March 2013

Nokia N72 (FBus cable) pinout

Nokia N72 mobile phone FBus data cable pinout.

  • Use 5.1 kOhm resistor
  • JIG number: 5
  • UFC v1 cable number: 3
  • UFC v2 cable number: 5 or 7


Also known as[edit]

  • Nokia N72-5 pinout / pin-out / connector
  • Nokia RM-180 pinout / pin-out / connector
  • Nokia RM180 pinout / pin-out / connector

Notes[edit]

  • Disconnect VPP pin in case of communication error.

Compatibility[edit]

Nokia N72 FBus cable pinout is compatible with:

Abbreviations[edit]

F/MBus cable connector pinout:
  • GND - Ground
  • TX - Data send
  • RX - Data receive
  • RX2 - ?
  • MBUS - MBUS data exchange protocol
  • FBUS - FBUS data exchange protocol
  • VPP - Programming power supply
  • VCC - Common collector voltage
  • VBUS - VBUS, USB powerdetect
Battery connector pinout:
  • GND - Ground (Attention, this is not system GND)
  • VBAT+ or VCC - Battery positive
  • BSI - Battery Size Indicator
  • BTemp - Battery Temperature (optional)

Related pinouts[edit]

See also[edit]