View source for Samsung M600 unlock using UST-PRO 2 by reading NCK code

== Unlock method ==
1. Connect UST-PRO 2 box on computer, then connect RJ45 E210-series data cable on UST-PRO2 box.

2. Turn on phone and connect on UST-PRO2 cable.

3. Select "M600" from "Model list".

[[Image:Samsung_m600_ust_unlock_code_1.jpg]]

4. Press "Read Codes" button. UST-PRO2 software now try to activate test mode on phone. (If UST can't activate it, press "Read codes" button again and press red button on M600 phone during UST tries to activating test mode.)

[[Image:Samsung_m600_ust_unlock_code_2.jpg]]

5. Now the unlock codes readed from phone. 

[[Image:Samsung_m600_ust_unlock_code_3.jpg]]

6. Remove battery from phone, then insert it back. Turn on phone, then enter this code: #0111*NCK# (NCK is the 8 digit code which was readed from phone by UST-PRO2). You may insert a SIM card in phone which is not accepted, then enter the code.

7. Now the phone is unlocked.