Search results

...[security code]]. So, You can change the phone's security code to whatever You like. When the phone asks for security code, enter mastercode which will be ...hone is asking for security code, then try to enter it. This is because if You accidentally entered wrong code, the handset will not accept any code (even

...[security code]]. So, You can change the phone's security code to whatever You like. When the phone asks for security code, enter mastercode, which will b

== What You need? == ...one data. If You see "Restoration file present for detected firmware" then You don't have to download restoration file.

== What You need == ; Error. Something wrong, PM308 is not calculated - Maybe you try to unlock BB5+ phone ?

== What You need == 5. A window will appear, asking if You would like to try new unlock method. Press "No".

* You may check [[Special:WantedPages|Wanted pages]] for the articles that does n * Or, see if you can add more content or correct anything anywhere within the CPKB wiki. May

Those pictures show the Siemens CF62 testpoint cut. After the cut You can unlock the phone as usual.

Those pictures show the Siemens A31 testpoint cut. After the cut You can unlock the phone as usual.

== What You need? == 5. After about 1 second the program finish unlocking procedure and You will see "Phone is unlocked" message.

* You must know phone code (if the phone asks it to turn on). == What You need? ==

* You may use [[JAF Nokia BB5 and BB5Plus No TP Unlocker FREE by Zulea]] instead ; Error. Something wrong, PM308 is not calculated - Maybe you try to unlock BB5+ phone ? : Check if the phone is really a Nokia SL1 mobil

...and energy to CPKB wiki. Read this page know what needs to be done and how you can improve CPKB wiki. Create a new content! Even a couple of lines of note ...an (and all the administrators and other users) see all your contributions you ever done on CPKB. [[Special:RequestAccount|Click here to request an accoun

== What You need? ==

== What You need? ==

== What You need? == ...ne, insert mobile phone battery then press "Power ON" button on phone till You see "Preloader OK!" in UST-PRO2 window. USTPro2 will detect phone and read

== What You need? ==

== What You need? ==

== What You need == You may have to flash an another software on the phone if the needed mcusw file

== What You need == You may have to flash an another software on the phone if the needed mcusw file

== What You need? == ...hen enter: #7465625*638*NCK code# (For example:#7465625*638*04976610#). Or You may insert a SIM card which is not accepted in the phone, and the phone wil

* You must flash the same version or newer version software on phone. If You don't know which software version does the mobile phone has, flash the newe == What You need? ==

== What You need? ==

Those pictures show the Siemens A65 testpoint cut. After the cut You can unlock the phone as usual.

== What You need? ==

* You may use [[JAF Nokia BB5 and BB5Plus No TP Unlocker FREE by Zulea]] instead

== What You need? == * You must know security code

== What You need == 4. If the log created successfully, You will see this screen. Press "OK" now.

* You need to flash new software on phone. == What You need? ==

...irst, select Phone model (in this case it is KP500), then select COM port (You can check the number of the port in Device manager). Then press "Connect po 5. After Vygis software finished the flahing process, You may press "Direct unlock" button on "Unlocker" tab. After that press "Disco

...list, then select "Use USB Cable" then select "Qualcomm Diagnostic Port" (You can check it in Device Manager > Ports). ...sage, but try again unlocking by pressing "Fast Direct Unlock". (Sometimes You have to try 10-15 times for succeess.)

...11*NCK# (NCK is the 8 digit code which was readed from phone by UST-PRO2). You may insert a SIM card in phone which is not accepted, then enter the code.

5. The unlock procedure finished. You may press "Inf" button again to check if all the locks are open.

* is a patch unlock method, if You flash new software on phone, the lock will be restored! 4. On "Sonyericsson" tab You may press "Save" button to save the settings. Then press "Identify" button

4. The phone will be read. You will see "New security (marita respin) phone" and "Flash CID 49" then setoo 8. When You see "Activation completed. Usercode reset to "0000" the unlock procedure fi

8. Security code reading process finished. Now You can disconnect the phone.

6. Unlock procedure finished, You may press "INF" again to check the simlock status of the phone.

* is a patch unlock method, if You flash new software on phone, the lock will be restored! If setool write that "Restoration file present for detected firmware" than You don't have to download restoration file from support site. (If not, downloa

# Then select "Network Lock", phone will warn You that NCK could be entered 10 times. Press "Yes" ; Your phone is not personalised : The phone is not locked, therefore You can't enter NCK code.

# You may have to select "unlock" ...is 2200 or 2201, so the complete code is: 2945#*2201# (or 2945#*2200#) if You have a C3310, the code is: 2945#*3311#. Please note nothing will happen aft

# Now the phone is unlocked. You may press "INF" again to read and check the locks of the phone.

'''You may check the status of the locks by entering *#7465625# code.<br>(It does

...er (incoming and outgoing calls). Note that You can't exit from this menu, You have to restart the phone after entering this code.

* [[Nokia 6233 pinout]] (You must remove the whole back cover to use the FBus cable on 6233 mobile phone

* [[Nokia 6233 pinout]] (You must remove the whole back cover to use the FBus cable on 6233 mobile phone

* [[Nokia 6233 pinout]] (You must remove the whole back cover to use the FBus cable on 6233 mobile phone

* [[Nokia 6233 pinout]] (You must remove the whole back cover to use the FBus cable on 6233 mobile phone

Here are the secrets that Nokia corp. didn't told You.

# In the directory of the downloaded setool software You will find setool2.ini <br> [[Image:Setool2_activation_upgrade_1.jpg]] .... Replace the "dummy" with Your setool2 server username. On the next line You will find this: password=dummy . Replace the "dummy" with Your setool2 serv

4. On "ODM" tab You may press "Save" button to save the settings. Then press "Identify" button 9. When "Unlock FINISHED" appear, You're finished. Phone unlocked.

...card that is not accepted'' Is shows the SIMlocks (locked and open locks). You can unlock the phone by entering the NCK here.